Tile Waterproofing Membrane Guide: Showers, Bathrooms & Wet Areas
Share
Tile itself is waterproof, but grout and the joints around it aren't. In a shower, tub surround or bathroom floor, water slowly gets through the grout and into the wall or subfloor behind it. A waterproofing membrane under the tile stops that water before it causes mould, rot or loose tile.
Where You Need a Waterproofing Membrane
- Shower walls and shower floors
- Tub surrounds and steam-prone bathrooms
- Laundry rooms and wet basement areas
- Kitchen backsplashes behind sinks
Waterproofing vs Uncoupling Membrane
| Parkwood Waterproofing Membrane | Parkwood Uncoupling Membrane | |
|---|---|---|
| Main job | Keeps water out of walls and subfloors | Absorbs movement between tile and subfloor to help prevent cracked tile and grout |
| Best for | Showers, tub surrounds, bathroom walls and wet areas | Floor tile, especially over wood subfloors or concrete prone to movement |
| Construction | Three layers of high-density polyethylene (PE) fabric, molded as a single piece | Creates space under the tile so the subfloor can "breathe" and release moisture |
| Roll size | 200 sq ft (1 m x 18.6 m) | See product page |
Many bathroom projects use both: uncoupling membrane on the floor and waterproofing membrane on shower walls.
How Much Membrane Do I Need?
- Measure every wall and floor area that will be tiled in the wet zone.
- Add about 10% for overlaps at seams and corners.
- Divide by 200 sq ft per roll of Parkwood Waterproofing Membrane and round up.
Example: a 5' x 8' shower with 8' walls on three sides is about 168 sq ft of wall plus 40 sq ft of floor = 208 sq ft. Add 10% ≈ 229 sq ft, so 2 rolls.
Installation Tips
- Start with a clean, flat, sound substrate.
- Overlap seams and inside corners and seal them as the installation instructions specify.
- Pay extra attention around the drain, valve and niche — that's where most leaks start.
- Follow the membrane and tile-setting material manufacturers' instructions, and Ontario Building Code requirements for your project.
Pair It with Porcelain Tile
Browse our luxury porcelain tile for floors and walls. All Parkwood membranes are Kypro's own brand, in stock in Ancaster.