Shoe Moulding vs Quarter Round: Which Should You Use?
Share
After you install a new floating floor — laminate, SPC or WPC vinyl, or engineered hardwood — there's an expansion gap left at every wall. Shoe moulding and quarter round both cover that gap without removing your baseboard. They look similar, but they're not the same.
Shoe Moulding vs Quarter Round at a Glance
| Step Bevel Shoe Moulding | Quarter Round | |
|---|---|---|
| Size | 3/8" x 1 1/4" x 10' | 11/16" x 11/16" x 10' |
| Shape | Slim, taller than it is deep, with a step bevel edge | Symmetrical quarter-circle |
| How far it sticks out from the baseboard | 3/8" | 11/16" |
| Look | Low-profile, clean and modern | Fuller, traditional |
| Best for | Standard expansion gaps; modern flat and step bevel baseboard | Larger gaps and uneven walls or floors; colonial baseboard |
| Price | $0.49 per linear foot | $0.59 per linear foot |
Which One Should You Use?
- Choose shoe moulding if your gap is within about 3/8" and you want the trim to disappear. It pairs well with step bevel and flat baseboard.
- Choose quarter round if the gap is wider, the wall or floor is wavy, or you have traditional colonial baseboard.
- Whichever you pick, use the same one throughout the room so it looks consistent.
Installation Tips
- Nail the moulding into the baseboard, not into the floor, so a floating floor can still expand and contract.
- Cope or miter inside corners; miter outside corners.
- Both Kypro mouldings come primed — caulk the top edge and paint to match your baseboard.
How Much Do I Need?
Measure the room's perimeter, subtract doorways and add about 10%. Divide by 10 (each piece is 10') and round up. A 12' x 14' room needs about 6 pieces.
Get Shoe Moulding and Quarter Round from Kypro
In stock with local pickup in Ancaster. Buy 10+ trim pieces — mix and match with baseboard and casing — and save 5% automatically at checkout. See also our Baseboard Size Guide and Poplar vs MDF Baseboard.