Best Underlayment for Laminate & Engineered Hardwood Floors (Ontario Guide)
Share
Installing laminate or engineered hardwood? The underlayment you put under it matters almost as much as the floor itself. A good underlayment smooths out small subfloor imperfections, adds comfort underfoot, cuts noise and protects the floor from moisture coming up from the subfloor — especially in Ontario basements and on concrete slabs.
Here is how to choose between the two underlayments Kypro stocks, and how much you need.
Do I Need Underlayment?
- Laminate: yes, unless the planks already have a pad attached.
- Engineered hardwood (floating installation): yes.
- Vinyl plank with an attached pad: usually no. For example, Kypro's Engineered Luxury Vinyl (WPC) already has a high-density IXPE foam underlay built in. Always follow the flooring manufacturer's installation guide — adding a second pad under a floor that already has one can affect the locking system and the warranty.
Kypro Underlayment Options Compared
| Nail800 Blue Single-Step | Parkwood EPE 2.0 mm Foil-Backed | |
|---|---|---|
| Best for | Laminate, engineered hardwood, luxury vinyl | Laminate, engineered wood, bamboo, vinyl (LVT/SPC/WPC) |
| Moisture protection | Air-gap technology helps prevent mold growth | Aluminum foil backing acts as a moisture and heat barrier |
| Comfort & sound | Support, comfort and sound suppression between floors | Comfort and thermal insulation |
| Installation | Single step, attached adhesive strip seals the seams | Lightweight and easy to roll out |
| Radiant floor heating | Works well over floor heating systems | — |
| Coverage per roll | 100 sq ft (1.2 m x 7.8 m) | 200 sq ft |
Which One Should I Choose?
- Choose Nail800 Blue for main floors and condos where sound reduction matters, over radiant floor heating, or when you want a one-step install with sealed seams.
- Choose Parkwood EPE 2.0 mm for budget-friendly projects, large areas and basements or concrete subfloors where a foil moisture barrier helps.
How Much Underlayment Do I Need?
- Measure the square footage of the room (length x width).
- Add about 10% for trimming and overlaps.
- Divide by the roll coverage: 100 sq ft for Nail800 Blue, 200 sq ft for Parkwood EPE. Round up.
Example: a 400 sq ft basement plus 10% = 440 sq ft. That's 5 rolls of Nail800 Blue, or 3 rolls of Parkwood EPE.
Installation Tips
- Make sure the subfloor is clean, dry and flat before you start.
- Roll the underlayment out in the same direction you'll lay the flooring.
- Butt the seams together and tape or seal them — don't overlap unless the product instructions say so.
- Finish the job with baseboard and shoe moulding or quarter round to cover the expansion gap at the walls. See our Baseboard Size Guide.
Get Underlayment from Kypro
Browse all Flooring Accessories, including underlayment and tile membranes. Contractors and bulk orders welcome.